Ic-7800 Mars Mod Mod Will Work#

Ic-7800 Mars Mod Mod Will Work

Range of transmit frequencies for Mars and CAP use, this mod will work.Example: bachelor of science Search Icom IC-718 All-Band TX (60M, MARS, CAP) - HFLINKIC-7100 MARS/CAP Modification. Extended receive provides coverage from 30 kHz to 199.999 MHz and 400-470 MHz.I finally decided to use the FT-7800 mod and take a chance that it would work. RF power is HF 100 watts, 50 MHz 100 watts, 144 MHz 50 watts and 430 MHz 35 watts. DSP at the IF level is the cornerstone of this impressive new multi-bander. The Icom IC-7100 is an affordable all-mode HF/VHF/UHF mobile transceiver with a very high Cool Factor.

A ground strap for the technician is recommended and a grounded temperature-controlled soldering iron are REQUIRED for this operation. DO NOT ATTEMPT THIS MODIFICATION IF YOU DO NOT HAVE THE PROPER TOOLS AND/OR TRAINING TO PERFORM THE MODIFICATION. Improper technique may damage the radio or result in undesirable operation and may require expensive repairs. This modification requires de-soldering of static-sensitive components. Tilt the front face plate down by removing the screws securing the top of the front plate bracket to the chassis.Icom IC-718 All-Band TX (60M, MARS, CAP) Neither MODS.DK nor the author are responsible for damage to any equipment resulting from the use of this information.1 icom IC-718 All-Band TX (60M, MARS, CAP) Neither nor the author are responsible for damage to any equipment resulting from the use of this information. Leave the antenna connector on, if the shield is grounded, or use a grounded lead and clip onto the chassis of the rig.

Reset of the radio will probably not be necessary. Tilt the front face plate down by removing the screws securing the top of the front plate bracket to the chassis.2 The bottom screws will act as a pivot. Leave the antenna connector on, if the shield is grounded, or use a grounded lead and clip onto the chassis of the rig.